Luxel T-9800CTP HD-X

Note

• *1 “0.4mm support option(BU-800)” and “BU-800 connection kit” are necessary for the plate of 0.3mm thickness or less when installed the platesetter at the place of sea level 1500m or more.
  Plate size of 0.4mm thickness must be 900 × 770mm or more.
  The plate of 0.4mm thickness must be used at the place of sea level less than 1500m.
  When the plate of 0.4mm thickness is used, “0.4mm support option(BU-800)” and “BU800 connection kit” are necessary, and original blower is replaced with BU-800.
• *2 When plate size is smaller than 1030x800, productivity will be the 67 pph or more.
  However, it is dependent on the processing speed of plate processor.
• *3 Center punch is special order required to check the possibility, please consult with the Screen Subsidiary in your region. Also, center punch cannot be use with HB220, DS220 and some non common press punches.
• *4 Positioning punch system is not supported in T-9800CTP HD-X.
  The notchless function can be used by the standard.
• *5 The chiller unit RCU-600 is for T-9800CTP HD-X. (RCU-500 is for T-9800CTP HD-E/S.)
• *6 Includes power requirements of Autoloader unit.
  The power supply of the BU-800 for high ground or 0.4mm plates cannot be taken from the recorder unit. BU-800 is required separated power source.